Streamlined Design - Maximum Profitability
XAG
Agricultural Drone
Watch now
The XAG P60 2024 agricultural drone features a maximum load capacity of 30 kilograms, an effective spreading load of 25 kilograms, a maximum spraying flow rate of 15 liters per minute
22
, and a maximum spreading rate of 190 kilograms per minute.
1
Equipped with a safe and intelligent control system and versatile, user-friendly operation methods, it meets the demands of most agricultural scenarios. Its compact size proves highly capable in delivering significant results.
-
Max. Flow Rate
15 liters/min
Upgradable to 30 liters/min 22
30-liter intelligent spray tank
10x improvement in processing 4
power, delivering more powerful intelligent performance
-
30kg spraying
payload
25 kg spreading payload 2
Multiple control modes
Fully autonomous operation
Single-hand/double-hand remote control
-
Maximum push speed
190 kg/min 3
45-liter material tank
8 minutes
Rapid charging 5
500 charge-discharge cycles 6
New mist cooling charging system
XAG RevoSpray 4
"A precise and efficient plant protection solution, optimized for single-operator use
The P60 is equipped with the latest generation of the XAG RevoSpray system, offering an effective spraying capacity of up to 30 kg and a flow rate of 15 liters per minute. The droplet size is adjustable from 60 to 400 microns, providing greater flexibility and optimal performance. With just one operator and a single device, efficient spraying can be achieved.
The system can be upgraded to a dual impeller pump, boosting the maximum flow rate to 30 liters/min.
-
30 litersStandard medicine box
-
15 liters/minMax. flow rateOptional 30 liters/min 22
-
5-10 metersEffective spray pattern 7
-
60-400 MicronAtomized particle size range 8
The innovative flexible impeller pump offers a lifespan of up to 300 hours
10
, eliminating the need for frequent replacements, making it economical and durable. It can be upgraded to a dual impeller pump.
A water pressure sensor in the tank eliminates errors caused by air bubbles, enhancing the accuracy and efficiency of the device.
The centrifugal disc design has been modified to improve the effectiveness of the spray droplets in high-flow water conditions.
XAG RevoCast 4
Spread half a bag of fertilizer in just 8 seconds. 11
Compact size, powerful performance
Spend less and enjoy the same powerful spreading capabilities. The P60, combined with the new XAG RevoCast 4, has a 25 kg payload and a maximum feed rate of 190 kg per minute. It is both precise and efficient, easily completing various spreading tasks such as sowing, fertilizing, seeding, and powder dispersal.
-
45 litersMaterial tank
-
190 kg/minMaximum push speed 12When spreading urea, the push rate is 150 kg/min
-
8 metersEffective spread width 13
-
13.8 m/sMaximum spreading speed
The vibrating vertical sweeping disc spreads evenly and quickly at high speed.
The size of the two material intake doors is doubled, making the task easier and faster.
With three different drill blade sizes, it allows for spreading a variety of materials: fertilizer, seeds, feed, and fine powder.
The Intelligent Control System SuperX 5 Pro
Empowering the agricultural drone with the most advanced 'brain' for optimal performance.
A further simplified flight control architecture, equipped with automotive-grade chips with 10 times the computing power of the previous generation
14
drives advanced functions such as environmental sensing, flight control, data transmission, and RTK navigation. This endows the P150 with more powerful autonomous flight and highly efficient operational capabilities.
Obstacle avoidance at maximum speed
The new 4D imaging radar accurately detects obstacles 1.5-100 meters
15
ahead in the flight path, independent of ambient light, ensuring safe operation day and night
Safe Takeoff and Landing
The integrated visual module accurately records the ground features of the takeoff and landing points, automatically hovering when anomalies are detected.
3D Autonomous Flight Without Imagery
By applying AI to the real-time terrain recognition system, the aircraft can fly safely and reliably across all terrains without the need for 3D maps.
The aircraft structure is sufficiently stable and reliable.
A perfect blend of industrial aesthetics and material science, balancing practicality, durability, and cost-effectiveness. It is easier
to use and maintain, with simplified disassembly and transport.
Design Highlights
New body structure, stable and reliable
48,5-inch large propeller, high efficiency and low noise
The arm can be folded, making transportation more convenient
IPX6K protection level, whole machine washable, reducing pesticide residues
Điểm nổi bật về thiết kế
Cấu trúc thân máy hoàn toàn mới, ổn định và đáng tin cậy
Cánh quạt cực lớn 60 inch, hiệu suất cao và độ ồn thấp
Có thể nâng cấp lên cánh quạt hiệu suất cao
Thiết kế nền tảng phân chia, các ứng dụng khác nhau như phun, trải rộng, khảo sát và lập bản đồ có thể được bật theo yêu cầu
Cánh tay máy có thể gập lại, giúp vận chuyển giữa các địa điểm dễ dàng hơn.
Cấp bảo vệ IPX6K, có thể giặt toàn bộ máy để giảm dư lượng thuốc trừ sâu
Multiple control methods, flexible options
Quần Áo Nông Dân XAG 5.0
Vận hành hoàn toàn tự động, dễ vận hành và thân thiện hơn với người mới sử dụng.
XAG ONE 5.0 Control Software
Fully automated operation, simple controls, user-friendly for beginners
Smart route planning
Based on the shape of the land, the optimal route will be automatically generated; it will automatically return when energy or materials are low and will automatically optimize the route when resuming flight after a stop.
One controller for multiple machines
Fully automated flight supports controlling two agricultural drones to enter the operational route simultaneously, enhancing the efficiency of collaborative operations.
High-speed flight can also flexibly avoid obstacles
The on-site obstacle avoidance feature supports a maximum flight speed of 13.8 meters per second, ensuring safe operation.
High-precision virtual positioning
When operating without a network or RTK, it can automatically generate high-precision virtual positioning based on the drone's location and supports manual position adjustments to ensure accurate operation.
Digital farm services
You can contact professional survey and mapping teams nearby to provide high-precision digital agricultural land mapping services for your farm.
Tương thích với Android và iOS
Expand to view interactive details
XAG ACS4 Smart Controller
Lightweight, convenient, and easy to use.
-
Quick connectionReady to use without any waiting
-
Security lock setupPrevents accidental touches, ensuring confident use
-
One-click operationSaves time and effort, easy to get started
-
12-hour battery life 16One charge lasts all day
XAG SRC4 Remote Controller with Screen
Flexible support, efficient operation
-
6-inch high-brightness 2K screen with an adjustable viewing angle allows for easy operation as desired. -
Long usage time of 5 hours, 17 continuousoperation without worry. -
Supports Wi-Fi connection, ensuring smooth flight even in areas without network coverage. -
Integrates the XAG One control app, allowing flexible switching between manual and automatic modes. -
Change the camera's viewpoint with just one button to control the drone and mark map points. -
The gap design ensures that the main control circuit is unaffected by the screen.
You can also choose to surround the land with a handheld survey device, click to view.
Tall trees, orchards on mountains, with severely obstructed signals?
Paired with the XAG DL1 Wave Repeater, it extends communication range, ensures continuous image transmission, and enables safer flights.
Power system and charging
Super-fast charging, with two batteries working alternately.
In agricultural operations, every second counts, making charging efficiency critically important. The entirely new mist cooling solution allows for charging immediately after landing, with various charging options, the fastest taking only 8 minutes.
18
The quick alternating work process, combined with a new, economical, and eco-friendly energy charging solution, ensures you start with a fully charged battery.
Smart Supercharge Battery B13970S
Capacity 975 watt-hours
1500 charge cycles 19
More integrated battery cells with enhanced protection
New Generation Battery Cooling Box
Tiny water droplets quickly evaporate, carrying away significant amounts of heat.
Mist spraying combined with a cooling fan.
One water bottle can be used for 6-8 hours. 20
GC4000+ Mobile Booster Station
Exceptional fuel efficiency, compact and lightweight
Multiple charge protection
Displays working hours and next oil change time
CM13600 Charger
Output power 3.4 kW
Compact and lightweight, weighing only 4.2 kg
Fully charges the battery in 11 minutes 21
New Energy Car Charger CM210600
Output power: 10 kW, supports dual charging
DC to DC conversion, reducing energy loss
Compatible with widely used new energy vehicles on the market
CM15300D Power Storage Unit
Compatible with 72V energy storage
batteries 15 kWh and above
Supports overcurrent, overvoltage, and overtemperature protection, real-time status monitoring, ensuring safer charging.
Pin siêu sạc thông minh B13970S
· Công suất 975 watt giờ
· 1500 chu kỳ
· Các tế bào pin được tích hợp nhiều hơn và bảo vệ tốt hơn
Hộp lạnh sương mù pin
· Những giọt nước cực nhỏ bay hơi nhanh và bị cuốn đi cực nhanh
rất nhiều calo
· Một bình nước có thể sử dụng trong 6-8 giờ22
Trạm tăng áp di động GC4000+
· Tiết kiệm nhiên liệu vượt trội, nhỏ gọn và nhẹ
· Bảo vệ nhiều lần sạc
· Hiển thị giờ làm việc và thời gian thay dầu tiếp theo
Bộ sạc CM13600
· Công suất đầu ra 3,4 kW
· Nhỏ gọn và nhẹ, chỉ nặng 4,2 kg
· Sạc đầy pin trong 11 phút
Bộ sạc xe hơi năng lượng mới CM210600
· Công suất đầu ra 10kW, hỗ trợ sạc kép
· DC sang DC, giảm tổn thất điện năng
· Áp dụng cho các loại xe sử dụng năng lượng mới phổ biến trên thị trường
Bộ sạc lưu trữ năng lượng CM15300D
· Áp dụng cho ắc quy lưu trữ năng lượng trên 72V và 15KWh
· 1500 chu kỳ
· Hỗ trợ bảo vệ quá dòng, quá điện áp và quá nhiệt, theo dõi trạng thái thời gian thực và sạc an toàn hơn
-
Fuel Charging StationConvenient for mobile operations and long battery life. -
Direct Power ChargingIdeal for high-standard agricultural land operations and more economical. -
New Energy Vehicle ChargingCharges two batteries simultaneously, goodbye to noise, and embrace green energy.
Package Price
City Electric Charger
Price
Contact us
Fuel Charger
Price
Contact us
New Energy Package
Price
Contact us
Authorized Distributors
Find the nearest store,
Get contact information for purchase inquiries.
After-Sales Service
XAG provides optional and tailored accident protection packages to help you quickly adapt to the season.
1.3.12. The maximum pushing speed is 190 kg/min measured with mixed fertilizer. The pushing speed using urea fertilizer is 150 kg/min. The particle size, density, and surface smoothness of different fertilizers vary, resulting in different effectiveness.
2. This is the rated load. There may be some discrepancies in the system data for different tasks. The data is also affected by the actual operating environment and operational parameters.
4.14. Comparison with XAG SuperX 4 intelligent flight control system.
5.18.21. According to laboratory results, under normal conditions, the CM13600 charger can charge a B13970S supercharge battery from 30% to 95% in approximately 11 minutes, and from 15% to 95% in approximately 14 minutes; the GC4000+ mobile charging station can charge a B13970S supercharge battery from 30% to 95% in approximately 11 minutes, and from 15% to 95% in approximately 14 minutes; the GC6000 mobile charging station can charge a B13970S supercharge battery from 30% to 95% in approximately 9 minutes, and from 15% to 95% in approximately 11 minutes; the CM15300D reserve charger can charge a B13970S supercharge battery from 30% to 95% in approximately 8 minutes, and from 15% to 95% in approximately 10 minutes; the CM210600 new energy vehicle charger can charge a B13970S supercharge battery from 30% to 95% in approximately 8 minutes, and from 15% to 95% in approximately 10 minutes. Actual values may vary depending on the working environment, usage habits, and daily maintenance practices.
6.19. The battery is warranted for 600 cycles or 12 months, whichever comes first. When using the B13960S or B13970 batteries, the P60 drone cannot perform a full-load flight. To ensure safety, the maximum payload when using the spraying system is 60 kg, and when using the spreading system is 60 kg. Any incidents related to battery errors, flight accidents, or safety issues caused by overloading will be the user's sole responsibility.
7.8.9.13.20. Actual operating data depends on real-world conditions. Product usage may vary due to the operating environment, temperature, human operational methods, etc. Users should strictly follow the official product instructions and usage guidelines.
10. According to laboratory tests, the actual service life may vary depending on actual usage conditions, exposure to chemicals, working intensity, and other factors.
11. This measurement is based on a 50 kg bag of mixed fertilizer.
15. The effective working range of the sensing distance will vary depending on the material, position, shape, etc., of the target object.
16.17. The data is based on actual measurements. During actual use, values may change due to charging environment, usage habits, daily maintenance practices, and other factors.
22. With the XAG P60 dual-impeller pump upgrade kit, the P60 can be equipped with a dual-impeller pump to achieve a maximum spraying flow rate of 30 liters/min.
XAG P60 2024 Agricultural Drone
Flight Platform
Basic Parameter
-
Dimensions
- 2517×2575×643 mm（(with propellers unfolded, includes XAG RevoSpray 4 P60 version）
- 1428×1487×615 mm（(with propellers folded, includes XAG RevoSpray 4 P60 version）
- 901×1082×643 mm（with propellers and arms folded, includes XAG RevoSpray 4 P60 version）
-
Platform Weight (including battery)
- 36 kg（with XAG RevoSpray 4 P60 version, including battery）
- 42kg（excluding two spray rods, with XAG RevoCast 4 P60 version, including battery）
- Symmetrical Motor Axial Distance:1850 mm
- Arm Material: Aluminum alloy
- Protection Rating: IPX6K
-
Rated Take-off Weight
- 66 kg (rated for spraying take-off）
- 67 kg (rated for spreading take-off)
Flight Parameters
- RTK High-Precision Navigation Time: Continuous precision with RTK data latency under 600 seconds
- Maximum Take-off Altitude: 2000 m （efficiency may decrease above this altitude)
- Maximum Flight Speed: 13.8 m/s
Recommended Operating Temperature
0 ~ 40 ℃
Hovering Accuracy (with strong GNSS signal)
RTK enabled: Horizontal ±10 cm, Vertical ±10 cm
RTK disabled: Horizontal ±0.6 m, Vertical ±0.3 m
Maximum Flight Height
30 m
Propulsion System
Motor
Model
B30
Maximum Thrust (per motor)
30 kg
Rated Power (per motor)
2200 W
Electronic Speed Controller (ESC)
Model
XESC-F180
Continuous Output Current
60 A
Maximum Output Current (30s)
180 A
Foldable Propellers
Material
Carbon fiber composite
Rotor Diameter
1232 mm
XAG RevoSpray 4 P60 Version
Smart Liquid Tank
Rated Capacity
30 L
Rated Load
30 kg
Centrifugal Atomization Nozzles
Quantity
2
Droplet Size
60 ~ 400 μm（varies with spray flow rate and environmental conditions）
Disc Rotation Speed
1500 ~ 16000 rpm
Spray Width
5 ~ 10 m（depends on flight speed, altitude, dosage per acre, and environment）
Flexible Impeller Pump
Quantity
1
Voltage
50 V
Maximum System Flow Rate
15 L /min
Flow Rate per Pump
0.5 ~ 15.0 L /min
XAG RevoCast 4 P60 Version
Smart Granule Tank
Rated Capacity
45 L
Rated Load
25 kg
Screw Variable Feeder
Feeder Quantity
1
Maximum Rotation Speed
10000 rpm
Maximum Discharge Rate
190 kg/min（tested with compound fertilizer under laboratory conditions; may vary depending on particle size, shape, density, and dryness）
Operating Temperature
0 ~ 40 ℃
Storage Temperature
0 ~ 40 ℃
Dispersion Particle Range
Particle Diameter 1 ~ 10 mm
Centrifugal Spreader Disc
Disc Quantity
1
Maximum Rotation Speed
5400 rpm
Spread Width
3-8 m（varies with flight altitude, seed weight, shape, dosage per acre, and environment）
Perception and Obstacle Avoidance System
4D Imaging Radar
Model
RD2488
Detection Range
1.5 ~ 100 m
Operating Voltage
24 V
Field of View (FOV)
Horizontal: ±40° ; Vertical: +90° ~ -45°
Power Consumption
10 W
Safe Obstacle Avoidance Altitude Relative to Ground
≥1.5 m
Operating Frequency
24 GHz
Safe Obstacle Avoidance Distance
2.5 m（distance between propeller tips and obstacle after the drone brakes and stabilizes in hover）
Perception Method
Beamforming, 4D imaging
Safe Obstacle Avoidance Relative Speed
≤13.8 m/s
Detection Parameters
Azimuth angle, pitch angle, distance, speed
Terrain Radar
Terrain Radar
TR24S100_24
Operating Frequency
24 GHz
Operating Voltage
5 V
Height Measurement Range
0.5 ~ 100 m（relative to crop surface）
Power Consumption
1.3 W
Altitude Holding Range
1 ~ 30 m（relative to crop surface）
Detection Method
Millimeter wave
Maximum Slope
45°（(flight speed ≤2 m/s）
FPV (First-Person View) Camera
Video Resolution
1920 x 1080
Power Supply Voltage
24 V
Frame Rate
30 fps
Video Encoding Format
H.264 / H.265
Image Sensor
1/2.8-inch CMOS-RGB sensor with 2 million effective pixels
Focal Length
Front FPV（2.7 mm）
Downward FPV（2.7 mm）
Power System
XAG B13970S Intelligent Supercharge Battery
Model
M1PPA13970B
Rated Output
48.75 V/140 A
Battery Type
Polymer lithium-ion
Maximum Charging Current
100 A
Rated Capacity
20000 mAh
Charging Temperature Range
10 ~ 45 ℃
XAG CM13600 Charger
Model
M2CM1-3600A
Input Voltage
Alternating Current ，100 - 120 Vac, 50/60 Hz, 15.0 A
Alternating Current，220 - 240 Vac 50/60 Hz 16.0 A
Output Ports
1
Output Voltage
56.6 Vdc
Output Power
1300 W（100 - 120 Vac 50/60 Hz）
3400 W（ 220 - 240 Vac 50/60 Hz）
Operating Temperature Range
-20 ~ 40 ℃
XAG GC4000+ Mobile Supercharging Station
Model
GC4000+
Net Weight
31.5 kg
Fuel Tank Capacity
15 L
Total Displacement
223 cc
Output Voltage
56.6 Vdc
Rated Current
75 ±3 A
Rated Charging Power
3400 W
Maximum Output Powe
5100 W
XAG CM15300D Energy Storage Charger
Model
M2CM15300DA
Output Ports
1
Output Power
5000W
Input Voltage
(60~100)Vdc
Output Voltage
56.6 Vdc
Output Current
100A
Operating Temperature Range
-20~40℃
XAG CM210600 Vehicle Charger
Model
M2CM210600A
Output Ports
2
Output Power
Port 1：5000W(300~500Vdc)
Port 2：5000W(300~500Vdc)
Input Voltage
300~500Vdc 35.0A(MAX)
Output Voltage
Port 1：56.6Vdc
Port 2：56.6Vdc
Output Current
Port 1：100A（Max）/5000W(300~500Vdc)
Port 2：100A（Max）/5000W(300~500Vdc)
Operating Temperature Range
-20~40℃
XAG 2024 Battery Mist Cooling Box
Model
M8BC5A
Output Ports
1
Water Tank Capacity
5L
Input Voltage
39~60V
Power
80W
Water Consumption
500 ml/h
Communication and Control System
XAG ACS4 Smart Controller
Model
M3ACS4A
Operating Frequency
SRRC : 2.4000 GHz ~ 2.476 GHz
Equivalent Isotropically Radiated Power (EIRP)
2.4 GHz SRRC : ≤20 dBm
Signal Range (Unobstructed, No Interference)
400 m
Operating Temperature Range
-10 ~ 40 ℃
Charging Temperature Range
5 ~ 40 ℃
Compatible Devices
XAG P60 2024 Agricultural Drone, XAG P150 2024 Agricultural Drone
XAG SRC4 Remote Controller with Display
Model
M3SRC4A
Operating Frequency
SRRC : 2.400 GHz ~ 2.476 GHz ; 5.725 GHz ~ 5.829 GHZ
Equivalent Isotropically Radiated Power (EIRP)
2.4 GHz SRRC : ≤20 dBm；5.8 GHz SRRC : ≤30 dBm
Signal Range (Unobstructed, No Interference)
2000 m
Operating Temperature Range
-10 ~ 40 ℃
Charging Temperature Range
5 ~ 40 ℃
Compatible Devices
XAG P60 2024 Agricultural Drone, XAG P150 2024 Agricultural Drone
XAG DL1 Data Link
Model
XAG DL1 Data Link
Operating Frequency
SRRC : 2.400 GHz ~ 2.476 GHz ; 5.725 GHz ~ 5.829 GHz
Equivalent Isotropically Radiated Power (EIRP)
2.400 GHz：
<33 dBm（FCC）
<20 dBm（SRRC/CE/MIC）
5.800 GHz：
<33 dBm（FCC）
<30 dBm（SRRC）
<14 dBm（CE）
Signal Range (Unobstructed, No Interference)
SRRC : 2 km
FCC : 2 km
Battery Capacity
14700 mAh
Charging Voltage
5V 3A / 15V 2A
Ingress Protection Rating
IP 65
XAG XRTK6 Handheld Surveyor
Model
M3RTK6A
Positioning Accuracy
Single-Point Positioning (RMS)
Horizontal： 1.5 m
Vertical:： 2.5 m
RTK (RMS)
Horizontal: < 5cm + 1ppm
Vertical:：< 7.5cm + 1ppm
Frequency Bands Supported
BDS: B1I、 B2I、 B3I
GPS: L1C/A、 L2P (Y)/L2C、 L5
GLONASS: L1、 L2
Galileo: E1、 E5a、 E5b
Battery Capacity
4800mAh
